====== Community Guide - Booster Board Install - DJI Spark ======
The photos below were provided by a member of our NLD family. 
No Limit Dronez has not confirmed the accuracy of the details in the pictures. To avoid doubt, you should follow the generic instructions provided by No Limit Dronez, which may include additional safety instructions to prevent damage to your booster board.

We don't have a full teardown video here, but we hope the photos will help you understand some practical mounting locations for the booster boards inside your aircraft.

===== Aircraft =====
<figure spark1>
{{:documentation:booster:specific:spark1.jpg|}}
<caption>**Mounting Position**</caption>
</figure>
----

<figure spark2>
{{:documentation:booster:specific:spark2.jpg|}}
<caption>**5 Volts Confirmed from power module**</caption>
</figure>

----

<figure spark3>
{{:documentation:booster:specific:spark3.jpg|}}
<caption>**Power connection details**</caption>
</figure>

----

<figure spark4>
{{:documentation:booster:specific:spark4.jpg|}}
<caption>**Booster mounting location and cable routing**</caption>
</figure>

----

<figure spark5>
{{:documentation:booster:specific:spark5.jpg|}}
<caption>**Wide shot including top case**</caption>
</figure>

----

<figure spark6>
{{:documentation:booster:specific:spark6.jpg|}}
<caption>**Top case**</caption>
</figure>

===== Remote =====
<figure sparkrc1>
{{:documentation:booster:specific:sparkrc1.jpg|}}
<caption>**Mounting Position**</caption>
</figure>

----

<figure sparkrc2>
{{:documentation:booster:specific:sparkrc2.jpg|}}
<caption>**Make room for antenna connectors**</caption>
</figure>

----

<figure sparkrc3>
{{:documentation:booster:specific:sparkrc3.jpg|}}
<caption>**Cable routing**</caption>
</figure>

----

<figure sparkrc4>
{{:documentation:booster:specific:sparkrc4.jpg|}}
<caption>**Power connection points**</caption>
</figure>

{{page>disclaimer&nouser}}