Table of Contents

Community Guide - Booster Board Install - DJI Spark

The photos below were provided by a member of our NLD family. No Limit Dronez has not confirmed the accuracy of the details in the pictures. To avoid doubt, you should follow the generic instructions provided by No Limit Dronez, which may include additional safety instructions to prevent damage to your booster board.

We don't have a full teardown video here, but we hope the photos will help you understand some practical mounting locations for the booster boards inside your aircraft.

Aircraft

Figure 1: Mounting Position
Figure 2: 5 Volts Confirmed from power module
Figure 3: Power connection details
Figure 4: Booster mounting location and cable routing
Figure 5: Wide shot including top case
Figure 6: Top case

Remote

Figure 7: Mounting Position
Figure 8: Make room for antenna connectors
Figure 9: Cable routing
Figure 10: Power connection points

Disclaimer

The official installation documentation is available in written form. Members of the community provided the information on this page. No Limit Dronez has not confirmed the accuracy of the details on this page. If the details here differ from the official written instructions, you should always follow the written instructions provided by No Limit Dronez.