Trace:

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
documentation:nld:start [2021/12/25 22:44] – gregkdocumentation:nld:start [2022/04/20 01:19] (current) – gregk
Line 75: Line 75:
   * Galileo satellites enabled (where supported by your hardware)   * Galileo satellites enabled (where supported by your hardware)
  
-=== FCC mode === +{{:documentation:nld:cfc.png?600|}}
-{{:documentation:nld:fcc-mode.jpg?600|}} +
-=== CE mode === +
-{{:documentation:nld:ce-mode.jpg?600|}}+
  
 The installation is a simple process. Just click the install button, and wait for the chains to fall off your bird. You can uninstall the custom flight controller later if you wish to do so. The installation is a simple process. Just click the install button, and wait for the chains to fall off your bird. You can uninstall the custom flight controller later if you wish to do so.
Line 115: Line 112:
   * Boost mode will look the same as FCC mode in the app and cannot be verified any other way.   * Boost mode will look the same as FCC mode in the app and cannot be verified any other way.
  
-{{:documentation:nld:fcc-check.jpg?600|}}+**FCC mode** 
 +{{:documentation:nld:fcc-mode.jpg?600|}} 
 +**CE mode** 
 +{{:documentation:nld:ce-mode.jpg?600|}} 
  
 FCC has a higher output for RC power than CE mode. You can change your RC to a higher level here. You must have a supported bird and be on compatible firmware. Connect your bird and Enable FCC Mode to change from CE to FCC. Once changed, you can leave it, or if you want even more power, you can Enable Signal Boost, along with FCC mode, for the highest power output possible.  FCC has a higher output for RC power than CE mode. You can change your RC to a higher level here. You must have a supported bird and be on compatible firmware. Connect your bird and Enable FCC Mode to change from CE to FCC. Once changed, you can leave it, or if you want even more power, you can Enable Signal Boost, along with FCC mode, for the highest power output possible. 
Line 155: Line 156:
 Current Mavic 2 owners cannot use the patched app and must use the current standard version of DJI GO4 for iOS or Android. For privacy, we recommend flying in aeroplane mode and caching your maps before you fly. Current Mavic 2 owners cannot use the patched app and must use the current standard version of DJI GO4 for iOS or Android. For privacy, we recommend flying in aeroplane mode and caching your maps before you fly.
  
-You can obtain a raw unpatched version of the 4.1.22 apk from http://www.openpilotlegacy.org/dji.go.v4-4.1.22-3028592-noseceo.apk+You can obtain a raw unpatched version of the apk's from the links below. You may need to Right Click and select 'Save Link As' to download these APK's. 
 + 
 +^Go4 4.1.22|http://dji-rev.com:8080/APK/DJI_Go_v4%204.1.22_NoSecNeo.apk| 
 +^Go4 4.1.14|http://dji-rev.com:8080/APK/DJI_Go_v4%204.1.14_NoSecNeo.apk| 
 +^Go4 4.1.15|http://dji-rev.com:8080/APK/DJI_Go_v4%204.1.15_NoSecNeo.apk|
  
 === 32 Channel Mode for P4 === === 32 Channel Mode for P4 ===